Nowadays Vodafone signal booster is one of the best solutions to the problem of poor communication. Despite the constantly evolving data transmission technologies, the expansion of the coverage area by cellular operators, in the UK today, there are enough places with insufficient or too low level of cellular signal.
Most often, due to the design features of the building, even if there is a base station nearby, basements or low-level rooms are still without a network. This is especially critical for retail and office space, where every call is important, and every missing call can lead to serious losses.
Solving this problem is now available to everyone thanks to UCtell and a special device – Vodafone signal booster. So you’re worried about what to do if your mobile connection is bad? You can just get such a booster and forget about this problem.
The principle of operation of the signal booster
The principle of operation of the signal booster kit is to transmit a radio signal from a safe reception area to places where there is no signal at all or it is very weak.
For example, on the street the signal level is medium or high, and indoors it disappears or decreases, and the connection begins to be interrupted. Schematically, the amplification process is as follows:
- A weak signal from the operator’s base station is picked up by an external antenna located on the street;
- From the external antenna the signal on a high-frequency coaxial cable is transferred to retransmission;
- The booster amplifies the signal and sends it further over the cable to the indoor antenna;
- The indoor antenna exchanges information with mobile devices and sends a signal in the opposite direction.
What is included in the booster’s kit?
The kit includes the booster itself, outdoor and indoor antennas, cable assembly (wires connecting the signal booster with external and internal antennas), booster power supply, mounting and detailed instructions for installation and operation of the kit.
Additionally, you can buy brackets and masts for attaching the street antenna to the wall of the building, as well as lightning protection, which prevents damage to equipment from electrostatic voltage caused by thunderstorms.
Installation of a booster’s set
Experts recommend starting with the installation of an outdoor antenna. You have already determined the direction to the nearest base station using the mobile application. Now you need to choose a place to attach the antenna to the wall. If we are talking about a country house, it is desirable to fix the antenna above. So there will be less obstacles in the way of signal propagation. If there is tall vegetation around the house, you can install an outdoor antenna on a special mast. When installing a connection kit in an apartment or office, the external antenna is usually mounted on the wall next to the window or on the window frame.
Then you need to run the cable from the external antenna into the room. This can be done by drilling a hole in the wall or in the floor if the antenna is installed on the roof.
Choose a place to mount the booster. It can be fixed to the wall or furniture with the included mount. You need a 220 volt outlet nearby to connect the repeater to the mains.
Then connect the indoor antenna, and mount it either on the wall or on the ceiling, as long as the cable is enough. The length of the internal antenna cable is usually 2 meters. If for some reason you need to install the antenna away from the repeater, you can purchase a separate cable assembly. Embedded diagrams will be given below.
What to do if the booster doesn’t work?
Sometimes there are difficulties with the connection and operation of the amplifier. Among the main problems are the following:
- after downloading the official application it is impossible to see the network;
- when installing the mobile application hangs by 95% and shows the end time of the amplifier;
- when connected, the gadget’s light glows orange, and starts flashing constantly;
- the device starts to overheat during operation.
In the absence of exclusion or failure to operate, you must see:
- router performance;
- correctness of filling in user data;
- correct installation and adjustment of the amplifier;
- correctness of the firmware for updates;
- correct choice of geolocation.
In addition, you should try to disable the permission to automatically determine the geolocation. This can be done via the setup menu. Just find the permission point for the applications on the device, find the right program and disable the permission to access the geolocation.
Pay attention! It is also worth noting that the device may not work if it has previously been deformed parts (begin to fall off) or it has come under overvoltage.
Do not forget about the fact that the device may simply be defective. In this case, it is recommended to replace it with a new one, but before that try all the above points.
Basic ways on how to connect a Wi-Fi booster
Along with the manual connection, there is another classic and simple option. It is based on a QR code. To do this, you must have a gadget. Since most users have a laptop, this option is more popular.
To connect on a laptop, you need to scan the device with a mobile device, go to the portal, which shows detailed instructions on how to connect traffic to another gadget. Then download the application and set the settings according to the prompts.
As you can see, this amplifier can be easily installed yourself or with the help of professionals. You can significantly improve the quality of communication in any part of your city and even countries. Choosing such a signal booster, you choose comfort. You no longer have to run to get in touch with relatives or friends! You can communicate by phone or by messenger anywhere without any problems. Just choose a signal booster for your office or home and enjoy quality communication or the Internet.